Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual - Manual (Page 3)

Rockwell Automation Publication 193-UM009B-EN-P - February 2013 iii
Important User Information
Because of the variety of uses for the products described in this publication, those responsible for the application and use of
this control equipment must satisfy themselves that all necessary steps have been taken to assure that each application and
use meets all performance and safety requirements, including any applicable laws, regulations, codes and standards.
The illustrations, charts, sample programs and layout examples shown in this guide are intended solely for purposes of
example. Since there are many variables and requirements associated with any particular installation, Rockwell Automation
does not assume responsibility or liability (to include intellectual property liability) for actual use based upon the examples
shown in this publication.
Allen-Bradley publication SGI-1.1, Safety Guidelines for the Application, Installation and Maintenance of Solid-State
Control (available from your local Allen-Bradley distributor), describes some important differences between solid-state
equipment and electromechanical devices that should be taken into consideration when applying products such as those
described in this publication.
Reproduction of the contents of this copyrighted publication, in whole or part, without written permission of Rockwell
Automation, is prohibited.
Throughout this manual we use notes to make you aware of safety considerations:
Attention statements help you to:
• identify a hazard
• avoid a hazard
• recognize the consequences
European Communities (EC) Directive Compliance
If this product has the CE mark, it is approved for installation within the European Union and EEA regions. It has been
designed and tested to meet the following directives.
• EMC Directive
• This product is tested per EN61000-6-4:2001 and EN61000-6-2:2005.
Allen-Bradley is a trademark of Rockwell Automation. DeviceNet™ is a trademark of the Open DeviceNet™ Vendors
Association (ODVA). All other trademarks and/or registered trademarks are the property of their respective owners.
ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property
damage or economic loss
IMPORTANT Identifies information that is critical for successful application and understanding of the product.