Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual - Manual (Page 44)

40 Rockwell Automation Publication 193-UM009B-EN-P - February 2013
Chapter 8 Tools Menu
Graph View Screen This menu displays the CIA data in graphical form.
Pressing the Enter key while the Graph View Screen is displayed stops the trace
and displays a cursor that can be used to view the raw value that was read for that
point on the graph.
Assembly Consumed/
Produced Menu The Assembly choice can be selected from the Tools Menu. This menu allows the
user to choose between the consumed (input) and produced (output) assemblies
available in the unit.
This screen show only one trace
configured
The raw data value
corresponding to a
point on the graph
where the cursor
intersects. Note: T1:
reflexes the trace
number that the
value corresponds to.
To change the trace
number, use the Sel
key.
The Cursor;
pressing the Inc/
Dec key will
HI:/LO: reflect the high and low data
values contained in this trace