Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual - Manual (Page 75)

Rockwell Automation Publication 193-UM009B-EN-P - February 2013 71
Terminal Setup Menu Chapter 17
Password Setup (Primary)
To activate the primary password, simply set the password to a value other than
zero. By logging in using that password value the operator will gain full control of
the 193-DNCT. The Password Setup Screen, when set to the Primary Password,
has the following format:
Password Setup (Secondary)
Secondary passwords limit access to certain device features, thus limiting some
operator’s ability to change the system configuration. The following menu is used
to configure secondary passwords:
To associate privileges to a specific secondary password, press the Sel key until the
cursor appears on the bit field. Setting a bit to a 1 enables edit privileges for that
feature; setting the bit to zero disables editing for that feature. Each of the
secondary passwords can be configured to have some or all privileges.
Password value
range is
0…999999
Primary Password selected.
Press the Inc/Dec key to get
to secondary passwords
This will appear when
changes to the password
have occurred. Press the
Enter key to save
Password value
range is
0…999999
Secondary password 1 selected
This will appear when
changes to the password
have occurred. Press the
Enter key to save