Offline change address screen – Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual User Manual
Page 70
![background image](/manuals/577423/70/background.png)
66
Rockwell Automation Publication 193-UM009B-EN-P - February 2013
Chapter 16 Terminal Choices Menu
Note
: It may take up to 10 seconds for the Faulted Address Recovery process to
complete.
If no faulted devices are found, the following screen will appear:
When faulted devices are found, they are reported as follows:
Offline Change Address
Screen
Use the Inc/Dec keys in the above screen to select a faulted device. Then pressing
the Enter key invokes the Offline Change Address Screen. Simply change the
device’s address and press the Enter key while Apply Changes is selected to
change the device’s address and reset the device.
Use the Inc/Dec key to select the next
device in the list.
Note: The selected device’s network
LED will flash red/green.
Device’s
serial
number
Device’s port number
Device’s vendor ID
New node address number