Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual User Manual
Page 58
![background image](/manuals/577423/58/background.png)
54
Rockwell Automation Publication 193-UM009B-EN-P - February 2013
Chapter 12 DeviceLogix™ Functionality
Notice that the current source bit assignment for a selected input will be
displayed on the screen for three seconds as shown below:
To edit an input source bit assignment, press the Enter key while the desired
input is selected. The following screen appears:
Press the Enter key when Edit is selected and the following screen appears:
The Assignment text
will disappear after
three seconds
Negating an input
makes the input an
active low instead of
an active high input
Not all inputs of all
function block types
can be left
unassigned, so this
option will not be
available for all inputs
of all function block
Not all inputs sources may be
supported by all products