Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual - Manual (Page 66)

62 Rockwell Automation Publication 193-UM009B-EN-P - February 2013
Chapter 14 Zone Interlock Protocol (ZIP)
Press the Right/ Left arrow keys to select the various bytes in the ZIP data table.
If no Zone has been mapped to the selected byte in the ZIP data table, the display
will appear as follows:
No I/O data
being consumed
is mapped to
this byte (byte
7) in the ZIP
data table
No Zone
number is
associated with
this byte of the
internal Zip
data table