Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual - Manual (Page 27)

Rockwell Automation Publication 193-UM009B-EN-P - February 2013 23
Parameter Choices Menu Chapter 6
parameters. Entering a new parameter number directly can be done by entering a
number with the numeric keypad (only if accessed through the Num List).
Changing a Parameter Value Changing a parameter value is done by pressing the Sel key to highlight the
parameter value then using the Inc/Dec keys or numeric keys to enter the value.
Pressing the Enter key will write the new value to the parameter. When the
Current parameter number
Pressing a numeric key will displayed
an edit box to enter a new parameter
number in.