Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual - Manual (Page 81)

Rockwell Automation Publication 193-UM009B-EN-P - February 2013 77
Chapter
18
Copy and Paste Feature
Copy and Paste Feature The 193-DNCT has a Copy and Paste feature that allows the operator to copy
Class, Instance, Attribute, Node Number, Min, and Max values from one menu
to another menu. Menus that support the Copy and Paste feature will display a
small C (copy indication) and P (paste indication) in the upper right hand corner
of the screen.
Some screens may only support the copy feature, so only the small C in the upper
right hand corner will appear. The small P in the upper right hand corner will
only appear after CIA data has been copied and will only appear on menus that
support CIA data paste feature. When a copy or paste is actually performed, the
text Copy or Paste will appear in the upper right hand corner for one second.
To perform a Copy or a Paste use the following key strokes:
To copy the CIA data on a screen:
· Press the Shift key, then
· Press the Copy key (Right Arrow key)
To paste the CIA data to a screen:
· Press the Shift key, then
· Press the Paste key (+/- sign key)
In the following example, we will copy the Class, Instance, and Attribute data
from a parameter screen to the GraphSetup Screen. First go to the Parameter
Copy and Paste
Support
indication for
menu