Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual - Manual (Page 36)

32 Rockwell Automation Publication 193-UM009B-EN-P - February 2013
Chapter 7 Copy Cat Menu
After selecting the file to download, press the Enter key to start the download. If
the device being downloaded to does not match the device the file was uploaded
from, an error is displayed before the download continues:
The following screen will appear when the downloading starts:
After parameters are downloaded, the DeviceLogix™ program is downloaded.
When the download is complete, the screen will appear as follows:
Mismatch type. This could be:
Vendor
ProdType
ProdCode
Revision
IMPORTANT Pressing the
Enter key will cause the Configuration Terminal to ignore the
electronic keying errors and continue the download.
Currently downloading
parameters. Note: Will
display “ScanList” for
copy cat of a scanner
Progress bar
Currently
downloading the
DeviceLogix™
program