Zip produced data, Zip data table monitor, Zip produced data zip data table monitor – Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual User Manual
Page 65
Rockwell Automation Publication 193-UM009B-EN-P - February 2013
61
Zone Interlock Protocol (ZIP) Chapter 14
When all edits are complete, the ZIP configuration data must be saved to the
device (Node 11 for this example). To save the changes, use the Sel key to
highlight the Save field and press the Enter key.
ZIP Produced Data
This screen allows the operator to configure the current device to auto-produce
I/O data to share with other devices when ZIP is enabled.
ZIP Data Table Monitor
This function is invoked by selecting Monitor from the ZIP Choices Menu and
pressing the Enter key. The screen allows the operator to monitor the ZIP data
table in order to view the I/O data that the device is consuming. The ZIP Data
Table Monitor screen functions as following:
When performing a Save, all the
configuration data for all Zones is
saved. The Save field will disappear
after the save is completed
Security Key is the
value of the last 2
bytes of the I/O data
produced by this
device if security is
Produce Rate is the
cyclic rate at which
this device will
produce data. Inhibit
Rate is the minimum
time between
Change of State I/O
Zip Disabled /Zip
Enabled is the Global
Enable for all ZIP
functions in the device.
This enables or disables
ZIP consumption and
ZIP production in this
Enables or Disables
the Auto production
of the I/O data for
this device. This
should be disabled if
the device is
“Connection Healthy” is
displayed if the I/O data is
being consumed before the
EPR times out. “Connection
Unhealthy” will be displayed
if the EPR timer for that zone
times out or if security is
enabled and the Security Key
does not match.
Node Number
the I/O data is
being consumed
from for the
selected ZIP
data table byte
This is the actual data in the
internal ZIP data table
Use the Right/Left
arrow keys to select
individual bytes in the
The highlighted bit represents the byte number in the I/O data that is being
consumed for the highlighted ZIP data table byte, in this case it is byte 0