Rockwell Automation 193 193-5.0: Bulletin 913/592 SMP-3 Solid-State Overload Relay User Manual
Page 58
Chapter 4 – Functional Description
4-10
Communication Parameters. (cont.)
[Firmware Revision]
The firmware revision number identifies the release
of the logic code that is controlling the SMP-3
overload relay. If contacting the factor regarding a
problem, be prepared to provide this number.
Parameter #
5
Parameter Type
Read Only
Units
None
[Device Port #]
This parameter identifies the port that the adapter
being used to monitor the parameter is connected to.
The SMP-3 overload relay only supports port 1 and
port 2, identified by a “1” in the second or third
position from the right, respectively.
Parameter #
6
Parameter Type
Read Only
Units
Byte
Bit
P rt
er
ett g
E p a at
7
6
5
4
3
2
1
0
Port Number
Setting
Explanation
X
Not Used
—
—
X
Port 1
1
Connected
X
Port 2
1
Connected
X
Not Used
—
—
X
Not Used
—
—
X
Not Used
—
—
X
Not Used
—
—
X
Not Used
—
—