Rockwell Automation 193 193-5.0: Bulletin 913/592 SMP-3 Solid-State Overload Relay - Manual (Page 78)

Chapter 6 – Serial Communication
6-8
The following section determines the value of the selected analog parameter sent from the SMP-3, and sends that value to the
corresponding destination of a Panelview. The Panelview destination is determined by the analog feedback designator from the
SMP (Rack 2, Word 0, Bits 5–7).
Rung 2:2
Average Current to Rack 3,Word 0
| I:020 I:020 I:020 +MOV–––––––––––––––+ |
+––]/[–––]/[–––] [––––––––––––––––––––––––––––––––––––––––+MOVE +–+
| 07 06 05 |Source I:021| |
| | 0| |
| |Destination O:030| |
| | 0| |
| +––––––––––––––––––+ |
Rung 2:3
Thermal Capacity Utilized to Rack 3,Word 1
| I:020 I:020 I:020 +MOV–––––––––––––––+ |
+––]/[–––] [–––]/[––––––––––––––––––––––––––––––––––––––––+MOVE +–+
| 07 06 05 |Source I:021| |
| | 0| |
| |Destination O:031| |
| | 0| |
| +––––––––––––––––––+ |
Rung 2:4
Full Load Current Setting to Rack 3,Word 2
| I:020 I:020 I:020 +MOV–––––––––––––––+ |
+––]/[–––] [–––] [––––––––––––––––––––––––––––––––––––––––+MOVE +–+
| 07 06 05 |Source I:021| |
| | 0| |
| |Destination O:032| |
| | 20| |
| +––––––––––––––––––+ |