Rockwell Automation 193 193-5.0: Bulletin 913/592 SMP-3 Solid-State Overload Relay - Manual (Page 77)

Chapter 6 – Serial Communication
6-7
The following section outputs the OUT A status, OUT B status, and Control status of the SMP-3 overload relay to a local rack and
Panelview address.
Rung 2:0
Output OutA Status, OutB Status, and Control Status from SMP (Rack 2,Word 0,Bit 0–2)
to Local Rack indicators (Rack 0, Word 1, Bits 0–2)
| +BTD–––––––––––––––+ |
+–––––––––––––––––––––––––––––––––––––––––––––––––––––––––+BIT FIELD DISTRIB +–+
| |Source I:020| |
| | 36| |
| |Source bit 0| |
| |Destination O:001| |
| | 4| |
| |Destination bit 0| |
| |Length 3| |
| +––––––––––––––––––+ |
Rung 2:1
Output SMP Status (Rack 2,Word 0, Bit 0–2) to PanelView (Rack 1,Word 0)
| +BTD–––––––––––––––+ |
+–––––––––––––––––––––––––––––––––––––––––––––––––––––––––+BIT FIELD DISTRIB +–+
| |Source I:020| |
| | 36| |
| |Source bit 0| |
| |Destination O:010| |
| | 36| |
| |Destination bit 0| |
| |Length 3| |
| +––––––––––––––––––+ |