Configuring discrete output modules – Rockwell Automation 1769-ADN Compact I/O 1769-ADN DeviceNet Adapter User Manual
Page 61
Advertising
Publication 1769-UM001B-EN-P - October 2002
Configuring Your Compact I/O Series A DeviceNet Adapter 3-11
Configuring Discrete
Output Modules
Follow these guidelines to configure discrete output modules.
1. From the Bank Configuration tab, click on the slot number of
the output module you would like to configure.
You’ll see a screen similar to this.
2. To change the input or output size, enter the new word value in
the appropriate field.
If you enter a non-valid number for a particular module, you
will see a screen with a range of valid numbers.
Advertising