Configuring analog input modules – Rockwell Automation 1769-ADN Compact I/O 1769-ADN DeviceNet Adapter User Manual
Page 64
Advertising
Publication 1769-UM001B-EN-P - October 2002
3-14 Configuring Your Compact I/O Series A DeviceNet Adapter
Configuring Analog
Input Modules
Follow these guidelines to configure analog input modules.
1. From the Bank Configuration tab, click on the slot number of
the analog input module you would like to configure.
You’ll see a screen similar to this.
2. To change the input or output size, enter the new word value in
the appropriate field.
If you enter a non-valid number for a particular module, you
will see a screen with a range of valid numbers.
Refer to the Comparison Feature section on page 3-22 for an
explanation on the use of this field.
Advertising