Rockwell Automation 1769-ADN Compact I/O 1769-ADN DeviceNet Adapter - Manual (Page 90)

Publication 1769-UM001B-EN-P - October 2002
4-14 Configuring Your Compact I/O Series B DeviceNet Adapter
4. From the Configuration Settings tab, double-click on the
Program State or Fault State groups to configure them.
You will see a screen similar to this one when you select a
Program State group.
TIP
When you uncheck the "Groups" box, you will see
all of the module’s parameters in a single list. When
you check the "Groups" box, the module’s
parameters will be grouped by channel or function.
You can configure the
Program/Fault State to
User-Defined Safe-State
or Hold Last State.