Rockwell Automation 2755 Cordless Hand-Held Scanner - Manual (Page 34)

Installing Your Hardware 2–13
Publication 2755-6.3
8. Charging the Battery
!
ATTENTION: Charge a battery
(Catalog No. 2755-HCP-B1) at room temperature of
65
_ F (18.3_ C) to 70_ F (21.1_ C) for optimum
performance. Allow the battery to adjust to room
temperature before charging.
You can charge the battery while the battery is in the gun. To
accomplish this task:
1. Make sure the battery is in the scanner handle. Make sure the
handle release button is pressed in below the outer housing when
sliding a battery into place.
Battery Pack
Handle Release Button