Rockwell Automation 2755 Cordless Hand-Held Scanner - Manual (Page 69)

Maintenance and Troubleshooting 5–7
Publication 2755-6.3
The power supply manages and conditions the power input to the
charger, eliminating the need for a replaceable fuse. Should a
power surge occur, the power supply connected to the charger
temporarily interrupts the current supply until the condition is
corrected. If an extreme surge occurred, the power light on the
power supply remains off and the power supply needs to be
replaced.
4. Attach the battery adapter (Catalog No. 2755-HCP-B3) to the
battery charger by aligning the adapter to the charger and sliding
the adapter downward, locking into place.
4-Slot Battery Charger
Battery Adapter
To remove the adapter, push the tab up and slide the adapter
outward.
Tab
4-Slot Battery Charger