Rockwell Automation 2755 Cordless Hand-Held Scanner User Manual
Page 96
Advertising
Advanced Data Formatting
C–5
Publication 2755-6.3
Beep Indicating Error
The duration of the following tones are long.
This Response
Indicates
4 Beeps (low–high–low–high tone)
Out of Rule memory. Erase some of the
existing Rules, then try and save Rule again.
3 Beeps (low–high–low tone)
Cancel rule entry. Rule entry mode exited
because of an error or you were asked to exit
Rule entry.
2 Beeps (low–high tone)
The wrong bar code was scanned. Re–enter
the Criteria or Action. All previously entered
Criteria and Actions are retained. Criteria or
Action list is too long for a Rule.
Advertising