Rockwell Automation 2755 Cordless Hand-Held Scanner - Manual (Page 94)

Advanced Data Formatting C–3
Publication 2755-6.3
Actions
Actions allow you to select how to format data for transmission.
Actions are composed of Send Data, Send Keystroke, Setup Pause,
and Send Preset Value. Send Data allows you to send all the data
that follows, send all the data up to a specific character selected from
the alphanumeric keyboard bar code, or send the next number of
characters (1 to 254) selected from the alphanumeric keyboard.
Send Keystroke allows you to scan the bar code for the keystroke
you wish to send. Setup Pause allows you to set the pause duration
parameter prior to entering ADF. Send Preset Value allows you to
send values 1 or 2 by scanning the appropriate bar code.
•
value 1 = scan suffix
•
value 2 = scan prefix
Rules Hierarchy
The last rule entered is the first rule read by the scanner. The
scanner reads the information and determines what needs to be
accomplished. If the last rule read is valid, the scanner may not go
on to the other rules so positioning of the rules is very important.
Default Rule
The default rule is Send All Data. If all the rules you create do not
meet the criteria, all the data is sent.