Rockwell Automation 2755 Cordless Hand-Held Scanner User Manual
Page 70
![background image](/manuals/580136/70/background.png)
5–8
Maintenance and Troubleshooting
Publication 2755-6.3
5. Insert a depleted battery into an adapter that is inserted into the
4-slot battery charger. Press the handle release button in as you
are sliding the battery into the adapter.
4-Slot Battery Charger
Battery Adapter
Battery
Handle Release Button
Charging Station
If you are charging a new battery pack, the battery charger may
prematurely switch to ready. If this occurs, remove the battery from
the adapter and reinsert.
Upon completion of a battery charge, the READY LED on the
battery charger will flash. This indicates the battery is 95% charged.
For 100% charge, leave the battery on the charger for 3 hours. A
fully charged battery can be left on the battery charger indefinitely.
The battery charger maintains the battery at 100% of its rated
capacity.