Rockwell Automation 2755 Cordless Hand-Held Scanner - Manual (Page 71)

Maintenance and Troubleshooting 5–9
Publication 2755-6.3
Conditioning the Battery
If you are using a battery for the first time or notice a decrease in
battery life:
1. Insert the battery into an adapter on the 4-slot battery charger.
2. Depress the PRESS TO CONDITION button for two seconds on
the 4-slot battery charger.
PRESS TO CONDITION Button
Pressing the PRESS TO CONDITION button performs a complete
discharge of the battery and will recharge the battery to full capacity.
Conditioning eliminates the situations that may cause the battery to
deliver less than its rated capacity. Conditioning may take 3–6
hours.