Rockwell Automation 2755 Cordless Hand-Held Scanner User Manual
Page 65
Advertising
Maintenance and Troubleshooting
5–3
Publication 2755-6.3
2. Connect the power supply to the appropriate receptacle supplying
AC power of the proper voltage level.
Power Supply
Voltage Level
2755-HCP-D1
100–240V ac/50–60 Hz
3. Place the scanner into the base/charger unit as shown below.
Make sure that the unit fits snugly into the base/charger.
4. Check the charge status indicator for a full charge (blinking
rapidly = full charge), which occurs within two hours. However,
you can use the scanner with less than a full charge.
Charge Status LED
Advertising