Rockwell Automation 2755 Cordless Hand-Held Scanner - Manual (Page 95)

Advanced Data Formatting C–4
Publication 2755-6.3
Listening for an ADF Audible Response
When scanning an ADF bar code symbol, you hear beeps from the
scanner. Refer to the following tables to determine the meaning of
the beeps.
Beep Indicating Normal Operation
The duration of the following tones are short.
This Response Indicates
2 Beeps (high–low tone)
Entry of a number is expected. Enter another
digit. Add leading zeros to the front if needed.
2 Beeps (low–low tone)
Entry of a alphabetic character is expected.
Enter another alphabetic character or scan
the End of Message bar code.
2 Beeps (high–high tone)
Entry of a Criteria or Action is expected.
Enter another Criteria or Action or scan the
Save Rule bar code.
4 Beeps (high–low–high–low tone) The Rule is saved. Rule entry mode is exited.
3 Beeps (high–low–low tone)
All Criteria and Actions were cleared for the
Rule currently being entered. Continue entry
of Rule.
1 Beep (low tone)
Last saved Rule was successfully deleted.
The Rule presently being entered is
unchanged.
3 Beeps (low–low–high tone)
All Rules are now deleted. The Rule
presently being entered is left alone.