Rockwell Automation 2755 Cordless Hand-Held Scanner - Manual (Page 38)

Chapter
3
Publication 2755-6.3
Configuring Your Scanner
This chapter describes the configuration options for the scanners.
Included are:
•
important notes on configuring a scanner
•
available symbologies
•
scanner bar codes
•
scanner default settings
•
parameter selections
•
parameter descriptions
•
configuration sequence
Important Notes on Configuring a Scanner
Be aware of the following when configuring the scanner:
•
The scanner bar codes are located in the Hand-Held Cordless Bar
Code Scanners Programming Guide (Publication No. 2755-6.6).
•
The scanner may be configured with default values, see
page 3–3. If the default values are suitable for your application,
scan the Set Defaults bar code.