Rockwell Automation 2755 Cordless Hand-Held Scanner User Manual
Page 66
Advertising
5–4
Maintenance and Troubleshooting
Publication 2755-6.3
Base/charger LED Status
Red LED
Indicates
Off
The scanner is not properly
inserted into the base/charger
unit or the battery is not
functioning properly.
Blinking Slowly
Battery charge is pending.
This occurs if the battery
temperature is too high or too
low or the battery is deeply
discharged. After several
minutes, normal charging
should begin.
On
The battery is actively
charging. Charging takes
approximately two hours.
Blinking Rapidly
Battery charging is complete.
Refer to page 5–13 for more information regarding low battery
strength.
Average life of a battery charge is 8 hours. Refer to page 5–10 for
replacing the battery.
Advertising