Rockwell Automation 8720MC 8720MC Regenerative Power Supply User Manual - Manual (Page 105)

Parameters 7-13
F.019 Selection of Wiring Error (LE) Detecting Function (Note 1)
This parameter selects
whether detecting function
of wiring error (LE) during
operation is used or not.
When "On" is selected,
existence of wiring error
will be verified when
operation is started. If
"OFF" is selected,
verification of existence of
wiring error will not be
performed.
Note 1: This parameter is
available from software
version No.3.00 (to be
shown on the parameter
F.018) or later only.
Parameter Range: OFF, On
Default Setting: On
Parameter Type: Requiring the password, configurable only while the unit is normal
Refer also to Parameters: N/A
F.018 Version Information
This parameter displays
the software version
number. Parameter Range: N/A
Default Setting: N/A
Parameter Type: Read only
Refer also to Parameters: N/A