Rockwell Automation 8720MC 8720MC Regenerative Power Supply User Manual - Manual (Page 94)

• Parameter Description
This is a description of the parameter's function.
• Parameter Range
This shows the predefined upper and lower limits of the
parameter value.
• Default Setting
The parameters are initially set before shipping from the factory,
and the default setting is such factory setting.
• Parameter Type
The parameter type identifies whether the parameter can be
modified at any time, is protected by password, or cannot be
modified during operation.
• Refer also to Parameters
This shows a list of associated parameters that may provide
additional or related information.
The parameter structure is shown in the following figure.
7-2 Parameters
SELF
U.———
F.———
Err
U.000
F.000
F.001
F.019
U.001
U.002
700
150
150
0
065.b
On
9HU
8LU
OIPL
PRG
PRG PRG
PRG
PRG
PRG
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
PRG
ENT
PRG
ENT
PRG
ENT
PRG
ENT
PRG
ENT
AC Input
Current
AC Input
Power Voltage
DC Bus
Voltage
Power
Load Ratio