European communities (ec) directive compliance, Emc directive, Low voltage directive – Rockwell Automation 8720MC 8720MC Regenerative Power Supply User Manual User Manual
Page 4
If this product has the CE mark it is approved for installation within the
European Union and EEA regions. It has been designed and tested to meet
the following directives.
EMC Directive
This product is tested to meet the Council Directive 89/336/EC
Electromagnetic Compatibility (EMC) by applying the following standards,
in whole or in part, documented in a technical construction file:
•
EN 50081-2 EMC - Generic Emission Standard, Part 2 -
Industrial Environment
•
EN 50082-2-EMC - Generic Immunity Standard, Part 2 -
Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage, by
applying the safety requirements of EN 61131-2 Programmable Controllers,
Part 2 - Equipment Requirements and Tests. For specific information
required by EN 61131-2, see the appropriate sections in this publication, as
well as the Allen-Bradley pulbication Industrial Automation Wiring and
Grounding Guidelines For Noise Immunity, publication 1770-4.1.
This equipment is classified as open equipment and must be mounted in an
enclosure during operation to provide safety protection.
European Communities
(EC) Directive
Compliance