Rockwell Automation GV3000/SE AC Drive Ver. 6.06 Hdwe Ref., Installation, and Troubleshooting Manual - Manual (Page 100)

9-16 GV3000/SE AC Drive Hardware Reference, Version 6.06
* Components of the 100-150 HP drives (M/N 125R4160) are identified in figure 2.7.
**It is recommended that the Gate Driver PCB and the Bus Clamp PCBs be replaced at the same time as
the IPM PCB.
Table 9.7 – 100-150 HP Drive Replacement Parts
Description* Part Number Quantity
Regulator PCB 413338–6BU 1
Power Module Interface PCB 413338–5AV 1
Power Module Interface PCB Fuses 413338–5AB 2
Keypad 413338–5AX 1
Gate Driver PCB 413338–5AC 6
Bus Clamp PCB (right)
Bus Clamp PCB (left)
413338–5AE
413338–5AF
2
2
Intelligent Power Module (IPM) PCB ** 413338–5AH 6
Thyristor Precharge Module 413338–5AJ 3
DC Bus Fuse 413338–5AK 4
Current Transformer 413338–5R 2
Ground Fault Transformer 413338–5AQ 1
Output Reactor 413338–5AR 3
Bus Discharge Resistor (1.5K ohms) 413338–5V 4
24V DC Fan 413338–5W 4
Thyristor Firing Pulse PCB 413338–5AG 1
Thyristor Firing Pulse PCB Fuses (15A) 413338–1JS 3