Rockwell Automation GV3000/SE AC Drive Ver. 6.06 Hdwe Ref., Installation, and Troubleshooting Manual - Manual (Page 125)

Index Index-3
Line Regeneration Modules, 2-20
Motor Encoder Cable, 2-20
Operator Interface Module, 2-21
Profibus Interface board, 2-21
Remote Meter Interface board, 2-20
Snubber Resistor Braking, 2-20
Snubber Transistor Braking, 2-20
L
LEDs, 2-19
Line branch circuit fuses, AC input, 3-9 to 3-10, 5-2
to 5-3
Line frequency, A-1
Line Regeneration Modules, 2-20
Local (digital input 8), 2-18, 7-2, 7-4, 7-5, 7-12
M
Machinery Safety Standard EN 60204-1, drive
compliance with, 7-6, B-1 to B-2
Mains filters, CE-compliant, 2-20
installing, C-2 to C-12
Mechanical motor overload protection, 6-1
Meter output, 2-18, 7-2, 7-10
Model numbers, 2-1
MOP (motor-operated potentiometer), 7-12 to 7-14
Motor
compatible reactors, 3-8
Encoder Cable Kit, 2-20
lead lengths, 3-7
overload protection, mechanical, 6-1
setting maximum speed, 7-7
wiring, 6-1 to 6-2
Mounting dimensions, 3-2 to 3-3
Mounting hardware, 4-1
N
NEMA 4X/12 drives, installing covers on, 8-2
NEMA enclosures
definitions, 2-3
part numbers, 9-12, 9-13, 9-14
ratings, 2-2
Network
AutoMax Network Option board, 2-20
ControlNet Network Option board, 2-20
DeviceNet Network Option board, 2-19
Profibus Interface board, 2-21
O
OIM, see Operator Interface Module
Open-loop control, see Volts/hertz regulation
Operator Interface Module (OIM), 2-21
Operator Interface Module connector, 2-19
Option board connector, 2-19
Optional equipment,
see Kits
Output
analog, see Analog Output
contactors, 6-1
digital,
see Status Relays
inductor, see Output Reactor
power wiring, 3-5 to 3-8, 5-1 to 5-6, 6-1 to 6-2
reactor, 2-8, 2-9, 9-15, 9-16
specifications, terminal strip, A-2
Output current values, 2-2, 3-9
P
Parts, replacement, 9-12 to 9-17
PC control,
see Control Source
Power board
location, 2-4, 2-5, 2-6, 2-7
part number, 9-13, 9-14
Power Module Inteface board
part number, 9-17
Power Module Interface board
location, 2-8, 2-9, 2-10
part number, 9-15, 9-16
Power Supply board
location, 2-4, 2-5, 2-6, 2-7
part number, 9-13, 9-14
Power terminals
tightening torque specifications, 5-5
wiring, 3-5 to 3-6, 4-1 to 4-9, 5-1 to 5-6, 6-1 to
6-2
Precharge contactor
location, 2-8
part number, 9-15
Precharge resistor
location, 2-8
part number, 9-15
Profibus Interface board, 2-21
Publications, related, 1-1
R
Ramp 1/Ramp 2 (digital input 7), 2-18, 7-2, 7-4, 7-5,
7-13
Ratings
AC input, 2-2