Rockwell Automation AADvance Controller Solutions Handbook - Manual (Page 101)

 
Document: 553631
(ICSTT-RM447J_EN_P) Issue: 09:
7-7
T9100 Base Unit Specification
Table 22: T9100 Processor Base Unit Specification
Attribute Value
Electrical Specification
Supply voltage requirements Redundant + 24V dc nominal; 18V dc to 32V
dc range
Number of processor modules supported 1, 2 or 3
Number of I/O base units supported 16: 8 per I/O bus
E1-1, E1-2; E2-1, E2-2; E3-1, E3-2 Connectors for Ethernet Ports 1 & 2 for
Processor A, B and C
S1-1, S1-2; S2-1,S2-2; S3-1, S3-2 Connectors for Serial Ports 1 & 2 for
Processor A, B and C
PWR-1, PWR-2 Connectors for Redundant +24V dc Power
Supplies
FLT Not used
KEY Connector for the Program Enable Key
Mechanical Specification
Dimensions (height × width × depth) 235mm x 126mm
(9 1/4 in x 5 in)
Weight 460g (16 oz.)