Rockwell Automation AADvance Controller Solutions Handbook - Manual (Page 41)

 
Document: 553631
(ICSTT-RM447J_EN_P) Issue: 09:
1-29
System Modification and On-line Updates
The AADvance controller has a modular design which allows you to change the I/O
hardware configuration. An on-line update feature also allows you to make the
required changes to the workbench I/O configuration.
The following changes can be made by an on-line update:
 Add new I/O base units, termination assemblies and extra I/O modules.
 Delete modules from the system
 Change the size of a termination assembly to change the configuration to
either increase the size or reduce the size of the module configuration.
 Move a module to a different slot.
 Change the variables for an I/O configuration change.
Making on-line changes after the system has been commissioned is the responsibility of
users and can have safety integrity implications the safety guidelines in the Safety
Manual need to be consulted before doing an on-line update.
On-line modifications must follow the end users' MOC process as required by the
applicable industry safety standards. On-line modifications must include any specific
checks recommended by Rockwell Automation for the product.
NOTE: If you are still using an earlier product release the I/O module configuration
cannot be changed with an on-line update.
Expansion Cable