Rockwell Automation AADvance Controller Solutions Handbook - Manual (Page 87)

 
Document: 553631
(ICSTT-RM447J_EN_P) Issue: 09:
6-1
This chapter provides a list of key information needed to specify a new AADvance
controller. The flowcharts and tables that follow will guide you through the process of
defining a suitable system for your application and requirements.
In This Chapter
Information to Specify a New Controller ..................................................... 6-1
Define a New System ........................................................................................ 6-2
Choosing Termination Assemblies ................................................................. 6-5
Specify I/O Base Units ....................................................................................... 6-5
Estimate AADvance Controller Weight ....................................................... 6-6
Estimate Module Supply Power Dissipation and Field Loop Power
Dissipation ............................................................................................................ 6-7
Information to Specify a New Controller
The following sets of information are needed to specify a new controller:
 The intended safety integrity level (SIL2 or SIL3) for your application
 The degree of fault tolerance needed
 Whether any final elements are energize to action (affects output module
arrangements for SIL3 requirements)
 The type and quantity of inputs and outputs
 The process safety time for each safety function
All of these items should be assessed and known for the particular plant and the
intended application.
Chapter 6
Specifying a New Controller