Rockwell Automation AADvance Controller Solutions Handbook - Manual (Page 79)

 
Document: 553631
(ICSTT-RM447J_EN_P) Issue: 09:
4-7
Controller Network Connectors
The controller features six autosensing 10/100BASE-TX Ethernet ports which allow it
to connect to a local area network through standard RJ45 Ethernet cable. There are
two ports for each processor module.
The controller Ethernet ports are located on the T9110 processor base unit and
identified like this:
Table 16: Allocation of 10/100BASE-TX Ports to Processor Modules
10/100BASE-TX Ports T9110 Processor Module
E1–1, E1–2 Processor A
E2–1, E2–2 Processor B (if fitted)
E3–1, E3–2 Processor C (if fitted)