Rockwell Automation FactoryTalk Historian SE 3.0 H2H Interface User Guide - Manual (Page 118)

Buffering
112
Bufserv
Bufserv buffers data to a standalone Historian Server, or to multiple standalone Historian
Servers. (If you want to buffer to multiple Historian Servers that are part of a Historian
Collective, you should use PIBufss.)
If the Historian Server to which you want Bufserv to buffer data is not in the Server list, enter
its name in the Add a server box and click the Add Server button. This Historian Server name
must be identical to the API Hostname entry:
The following screen shows that Bufserv is configured to write to a standalone Historian
Server named
etamp390 . You use this configuration when all the interfaces on the interface
node write data to etamp390 .
The following screen shows that Bufserv is configured to write to two standalone Historian
Servers, one named
etamp390 and the other one named starlight . You use this
configuration when some of the interfaces on the interface node write data to etamp390 and
some write to starlight .