Rockwell Automation FactoryTalk Historian SE 3.0 H2H Interface User Guide - Manual (Page 64)

Startup Command File
58
Debug Tab
Debug Parameters
The Debug Levels parameter is used to set a debug level for debug messaging per scan class.
Check all types of debug messages that you would like to see logged. Any combination of
debug levels can be applied. (
/DB=#,#,#,#... )
Interface Status Tag on Receiving Historian Server:
This is the name of an interface status tag configured on receiving server. Click the Browse
button to browse the point database for this interface status tag using the Tag Search utility.
(
/IST=tagname )