Dataaccess, ptaccess, Zero, span – Rockwell Automation FactoryTalk Historian SE 3.0 H2H Interface User Guide User Manual
Page 53
Advertising
FactoryTalk Historian To Historian Interface User Guide
47
DataAccess, PtAccess
Historian 3 nodes use these attributes to control client read/write access to the data and point
attributes. Access may be specified for owner, group and world. The user and groups used
must be created before assignment. Example:
dataaccess=o:rw g:rw w:r
,
ptaccess=o:rw g:r w:r
.
Zero, Span
These attributes should match for the source and receiving points.
Advertising