Interface health monitoring points – Rockwell Automation FactoryTalk Historian SE 3.0 H2H Interface User Guide User Manual
Page 132
Advertising
![background image](/manuals/581554/132/background.png)
Interface Diagnostics Configuration
126
Interface Health Monitoring Points
Interface Health Monitoring Points provide information about the health of this Interface. To
use the ICU to configure these points, select this Interface from the Interface drop-down list
and click Health Points from the parameter category pane:
Right-click the row for a particular Health Point to display the context menu:
Click Create to create the Health Point for that particular row. Click Create All to create all
the Health Points.
To see the current values (snapshots) of the Health Points, right-click and select Refresh
Snapshots.
Advertising