Rockwell Automation FactoryTalk Historian SE 3.0 H2H Interface User Guide - Manual (Page 39)

FactoryTalk Historian To Historian Interface User Guide 33
Installing Interface Service with Historian Interface Configuration
Utility
The Historian Interface Configuration Utility provides a user interface for creating, editing,
and deleting the interface service:
Service Configuration
Service name
The Service name box shows the name of the current interface service. This service name is
obtained from the interface executable.
ID
This is the service ID used to distinguish multiple instances of the same interface using the
same executable.
Display name
The Display Name text box shows the current Display Name of the interface service. If there
is currently no service for the selected interface, the default Display Name is the service name
with a “Historian-” prefix. Users may specify a different Display Name. Rockwell
Automation suggests that the prefix “Historian-” be appended to the beginning of the
interface to indicate that the service is part of the Rockwell Automation suite of products.