Pi2 security file – use pi2 security file, Pi2 security file - unique part, Pi2 security file - user – Rockwell Automation FactoryTalk Historian SE 3.0 H2H Interface User Guide User Manual
Page 61: Pi2 security file - password, Additional parameters
FactoryTalk Historian To Historian Interface User Guide
55
PI2 Security File
– Use PI2 security file
The PI2 Security File section is used only if the source host is a PI2 server. If a security file is
to be used, select the Use PI2 security file check box.
PI2 Security File - Unique Part
The Unique part is the name suffix of tag security file on a Historian 2 system. The full name
on the Historian 2 system is
PItoPI<name>
.SEC, where <
name
> is the portion specified in
the Unique part box. (
/SF=uniquename
).
PI2 Security File - User
The User is the login user name of a PI user on Historian 2 node that the interface is to use.
This is used for Historian 2 source systems. (
/LN=username
).
PI2 security File - Password
The Password is the login password of the PI user specified in the User box on Historian 2
node. This is used for Historian 2 source systems. (
/PW=password
).
Additional Parameters
This section is provided for any additional parameters that the current ICU Control does not
support.