Rockwell Automation 2198-Hxxx Kinetix 5500 Drive Systems Design Guide - Manual (Page 29)

Rockwell Automation Publication GMC-RM009D-EN-P - June 2014 29
Kinetix 5500 Drive Systems
Kinetix 5500 (200V-class operation) Drives with Kinetix VP Food Grade Motors
This section provides system combination information for the Kinetix 5500 drives (with 240V, nominal input) when
matched with Kinetix VP (200V-class) food-grade motors. Single cable catalog numbers, system performance
specifications, and the optimum torque/speed curves are included.
Kinetix 5500 servo drives are capable of 200V or 400V-class operation. These system performance tables and torque/speed
curves reflect single-phase and three-phase drive operation with 200V-class motors; however, only 2198-H003-ERS
x,
2198-H008-ERS
x, and 2198-H015-ERSx drives are capable of single-phase operation.
Bulletin VPF Motor Cable Combinations
Motor Cat. No. (200V-class) Feedback Type Single Cable Cat. No.
(1)
(1) Cable length xx is in meters, 01 (3.3)…50 (164) in 1.0 m (3.3 ft) increments. Refer to the Kinetix Motion Accessories Technical Data, publication GMC-TD004 , for cable specifications.
For cable configuration illustrations and feature descriptions, by catalog number, refer to 2090-Series Single Motor Cable Overview beginning on page 11 .
VPF-A0632F, VPF-A0633C, VPF-A0633F
Multi-turn or Single-turn
Digital Encoder Feedback
2090-CSBM1DF-18AA
xx or
2090-CSWM1DF-18AA xx (standard, non-flex)
2090-CSBM1DF-18AF xx (continuous-flex)
VPF-A0752C, VPF-A0753C
VPF-A1001C
VPF-A0752E, VPF-A0753E
2090-CSBM1DF-14AA xx or
2090-CSWM1DF-14AA
xx (standard, non-flex)
2090-CSBM1DF-14AF xx (continuous-flex)
VPF-A1001M , VPF-A1002C, VPF-A1002F
VPF-A1003C, VPF-A1003E, VPF-A1003F
VPF-A1153C
VPF-A1303B, VPF-A1303F
VPF-A1304A, VPF-A1304D