Metrohm Vision Manual User Manual
Page 111
▪▪▪▪▪▪▪
109
2.
In the Edit Identify Method dialog box configure the following parameters:
•
From the Identification Method list choose the method.
•
From the Pretreatment Method list choose the desired math pretreatment methods.
You can choose multiple methods; they will be applied in the order of choice.
•
In the Wavelength box specify the overall wavelength range.
•
In the Threshold box declare the preferred type of threshold (match value or
probability, when appropriate). Optionally edit the threshold value.
•
Check the Identify Acceptance Set box if you want Vision to identify samples in the
Acceptance Set.
•
Check the Identify Rejection Set box if you want Vision to identify samples from the
Rejection Set.
•
When wavelength maximum distance is chosen as the identification method, the
Library Stabilization box appears. You can change the default value (0 nm) of the
stabilization constant to remove false negative results caused by zero-crossovers.
3.
Click on OK when done.