Metrohm Vision Manual - Manual (Page 188)

186 ▪▪▪▪▪▪▪
Click on the User ID (in this case RAOPER) to highlight it and then click on Toggle Access
button. The user acquire a check mark next to the User ID:
Click on OK when done.
Log out of Vision (DO NOT EXIT) and log in as the RA Operator. Click on Open Project icon and open
the project with the Operations Method (only one project should show in the Open Project dialog).
Close Vision.
When the Routine Analysis Operator starts Vision and logs in with RA Operator credentials, the
Connect To Instrument window opens: