Metrohm Vision Manual - Manual (Page 178)

176 ▪▪▪▪▪▪▪
22. Select up to 8 views from the list and click on "Next".
Choose the layout of the views by clicking on the view in the list, and then on the proper
rectangle representing the view location.
23. Click on Next and Finish buttons to return to the wizard.
The following views are available for display:
• Sample Spectra – displays last acquired sample spectra.
• Conformity Index – displays conformity index spectrum from the qualification step if
maximum distance is used as a qualification method. If Mahalanobis distance or Residual
Variance is used as a qualification method, the view displays residual spectrum (the part not
modeled by PC method). If correlation or no qualification method is used, or sample spectrum
does not pass identification, the display is empty.
• Sample + Conformity Index – displays last acquired sample spectrum and conformity index
spectrum on one plot.
• Reference Spectra – displays last acquired reference spectrum.
• Reference + Sample Spectra – displays last acquired reference and sample spectra on one plot.
• Results Report – displays the report with Routine Analysis results.
• X Control Chart – displays the average differences control chart. The chart has to be
configured in Quant Setup.
• R Control Chart – displays the range of differences control chart. The chart has to be
configured in Quant Setup.
• Running Standard Deviation – displays the control chart with running standard deviation. The
chart has to be configured in Quant Setup.