Metrohm Vision Manual User Manual
Page 166
164
▪▪▪▪▪▪▪
In order to configure an Operation Method using the wizard follow these steps:
1.
Click on Mode/Routine Analysis/OM Wizard
2.
From the Select Operations Method window select an existing Operation Method and click on
Modify/View button if it needs editing. If creating a new method, click on New button.
If a new method is chosen, Vision will display the following window:
Please note that this window is not displayed in an existing method is edited.
3.
Select the standardization type compatible with your data and models. During the Operations
Method setup Vision will display only items (DCMs and models) consistent with chosen
standardization. Other items will be filtered out. Click on OK.
4.
On the next screen, type in the Operation Method name (if the new method is being created).
Click on Next button.