Metrohm Vision Manual - Manual (Page 77)

▪▪▪▪▪▪▪ 75
• If necessary, create a new directory by clicking on Create Dir. If you do not want to create a
new directory, click on OK.
• The next window prompts the user to select a way of export (export linked projects/libraries).
If you click on Yes, the linked projects will be exported together with the library. If you click
on No, the links will be broken and the library will be exported alone. A library exported this
way cannot be further developed or modified when imported to another computer. It has to
be used in Routine Analysis “as is”.
• Vision will save a single file in a ZIP format in the selected drive. It can then be restored on
another computer from the Vision software.
3.11.5 Exporting (Backing Up) Projects
Vision has an export project function built in. The projects are compressed before saving, so they
occupy much less space than original data. There are two ways in which a project can be exported:
• A project can be exported together with a library linked to an Operations Method (if the
Operations Method exists). A linked library exported with a project can not be further
developed or modified when imported to another computer, unless it uses only spectra from
the exported project. It has to be used in Routine Analysis as is.
• A project can also be exported without the linked library or output projects.
Calibration equations and Operations Methods that were created in a project are always exported
with the project. The Operations Method output project is exported only when a linked library or
project is exported.
If you want to export a project and be able to modify a library used by the project Operations