Metrohm Vision Manual User Manual
Page 176
Advertising
174
▪▪▪▪▪▪▪
19.
Checking Use Digital Protocol (DDE11) box connects routine analysis output to external
process control system through 4-20 mA link or through digital protocols such as OPC,
Modbus, or Profibus. For list of available protocols please contact Metrohm representative.
Configuration of other options can be found in digital protocols or Vision I/O Module
manuals.
20.
Click on Next button to advance to the next screen.
The Configure Output screen allows choosing views available during routine analysis.
Advertising