Metrohm Vision Manual - Manual (Page 158)

156 ▪▪▪▪▪▪▪
Choose the layout of the views by clicking on the view in the list, and then on the proper rectangle
representing the view location.
Click on Next and Finish buttons to return to the wizard.
The following views are available for display:
• Sample Spectra – displays last acquired sample spectra.
• Conformity Index – displays conformity index spectrum from the qualification step if
maximum distance is used as a qualification method. If Mahalanobis distance or Residual
Variance is used as a qualification method, the view displays residual spectrum (the part not
modeled by PC method). If correlation or no qualification method is used, or sample spectrum
does not pass identification, the display is empty.
• Sample + Conformity Index – displays last acquired sample spectrum and conformity index
spectrum on one plot.
• Reference Spectra – displays last acquired reference spectrum.
• Reference + Sample Spectra – displays last acquired reference and sample spectra on one plot.
• Results Report – displays the report with Routine Analysis results.
• X Control Chart – displays the average differences control chart. The chart has to be
configured in Quant Setup.
• R Control Chart – displays the range of differences control chart. The chart has to be
configured in Quant Setup.
• Running Standard Deviation – displays the control chart with running standard deviation. The
chart has to be configured in Quant Setup.
• Trend Chart – displays predicted results vs. time chart. The chart has to be configured in
Quant Setup.
• ID Trend – displays the trend chart of predicted ID values.
• Running Average – displays the control chart with running average. The chart has to be
configured in Quant Setup.
• Running Residual Standard Deviation – displays the control chart with residual standard
deviation. The chart has to be configured in Quant Setup.
• Grand Average – displays the control chart with grand average. The chart has to be
configured in Quant Setup.
• Grand Standard Deviation – displays the control chart with grand standard deviation. The
chart has to be configured in Quant Setup.
• Grand Residual Standard Deviation - displays the control chart with grand residual standard
deviation. The chart has to be configured in Quant Setup.
• Combined X Chart – displays single average differences control chart for all constituents in the
selected product. The chart has to be configured in Quant Setup.
• Combined Trend Chart - displays single results vs. time chart for all constituents in the
selected product. The chart has to be configured in Quant Setup.