Metrohm Vision Manual User Manual
Page 134
Advertising
132
▪▪▪▪▪▪▪
If you know what wavelengths you want to use, or if you want to use analog (transducer)
values in the equation, click on Pre-select Values in the Manually Enter Terms field.
Specify the number of terms to be used in the equation. Click on OK when done.
3.
In the Regression Treatment Properties dialog box, define the math treatment parameters and
the wavelengths or transducers values (if you selected Manually Enter Terms in the above
step)
4.
Click on OK when done. Vision will perform calculations and display results.
Advertising